Carboxymethyl sago pulp/chitosan hydrogel as an immobilization medium for activated sludge for p-nitrophenol biodegradation

In this study, carboxymethyl sago pulp (CMSP) derived from sago waste was successfully crosslinked with ferric ions in the presence of chitosan forming a novel immobilization matrix for p-nitrophenol (PNP)-acclimated activated sludge. On the basis of the shortest biodegradation time of PNP, the optimized operational conditions of immobilization were found to be: 7 w/v% CMSP, 9 g L⁻¹ of activated sludge, 0.1 M ferric ion, and 15 min of crosslinking time. Observable inhibited PNP biodegradation was exhibited by the suspended activated sludge at the initial PNP concentration of 400 mg L⁻¹. In contrast, complete mineralization was achieved by the CMSP/chitosan-immobilized activated sludge (CMSP/Ch-AS) beads. The results revealed the important role of CMSP/Ch hydrogel in protecting activated sludge from the toxicity of PNP. The CMSP/Ch-AS beads could be reused consecutively up to three and two cycles, respectively, for the biodegradation of PNP at 200 and 400 mg L⁻¹, with the attainment of more than 99% of PNP removal at each cycle. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47531.     

Advances and Perspectives in Dental Pulp Stem Cell Based Neuroregeneration Therapies

Human dental pulp stem cells (hDPSCs) are some of the most promising stem cell types for regenerative therapies given their ability to grow in the absence of serum and their realistic possibility to be used in autologous grafts. In this review, we describe the particular advantages of hDPSCs for neuroregenerative cell therapies. We thoroughly discuss the knowledge about their embryonic origin and characteristics of their postnatal niche, as well as the current status of cell culture protocols to maximize their multilineage differentiation potential, highlighting some common issues when assessing neuronal differentiation fates of hDPSCs. We also review the recent progress on neuroprotective and immunomodulatory capacity of hDPSCs and their secreted extracellular vesicles, as well as their combination with scaffold materials to improve their functional integration on the injured central nervous system (CNS) and peripheral nervous system (PNS). Finally, we offer some perspectives on the current and possible future applications of hDPSCs in neuroregenerative cell therapies.     

工业4.0时代下智能造纸工业的构建及其关键技术

结合造纸工业资金密集、技术密集、能源密集等产业特点,利用"互联网+""工业4.0"理念,探讨"互联网+传统造纸工业"即"智能造纸工业"发展新模式,旨在为探索传统造纸工业新的产业增长点献计献策,推动传统造纸工业向智能制造、绿色制造、柔性制造转型升级,进入互联网经济新兴业态。     

Isolation and identification of high pressure‐resistant bacteria naturally contaminating strawberry pulp

The inactivation of bacteria naturally present in strawberry pulp was investigated after high hydrostatic pressure (HHP) treatment at pressure levels up to 600 MPa at 25 °C for 5 ~ 25 min. Five strains of pressure‐resistant bacteria designated as A, B, C, D and E were isolated and identified. The five strains were gram‐positive, spore‐forming, rods or rod in chains. Growth of the strains was observed at 30 ~ 45 °C, and strain B also grew well at 55 °C. They could produce acid from glucose and were catalase‐positive. Analysis of 16S rRNA gene sequences showed that the five strains belonged to the genus Bacillus. Strain A and D exhibited the greatest 16S rRNA gene sequence similarity of 99% with B. licheniformis and B. firmus, respectively. By combination of phenotypic characteristics and 16S rRNA gene sequences, strain C was B. mycoides and E was B. pumilus. On the basis of physiological and biochemical characteristics, gyrB gene sequences analysis and whole‐cell fatty acids analysis, strain B was B. amyloliquefaciens. Further studies showed that strain B (B. amyloliquefaciens) exhibited the highest pressure resistance, and it was reduced by 4.62‐log after treatment at 600 MPa for 25 min at 25 °C as the most effective observed inactivation.     

Assessment of selected properties of LDPE composites reinforced with sugar beet pulp

This study measured the effect of sugar beet pulp (SBP) and maleated polyethylene (MAPE) concentrations on the properties of low density polyethylene (LDPE) composites. SBP concentration has significantly increased density, thickness swelling (TSW), water absorption (WA), flexural strength (FS), tensile modulus (TM) and flexural modulus (FM) of composites while reducing tensile strength (TS), elongation at break (EatB) and impact strength (IS). Presence of MAPE has improved TSW, WA, TS, FS, TM and FM. However, EatB and IS were slightly worsened by MAPE use. Composites showed two main decomposition peaks; one coming from SBP (360–368 °C) and the second one from LDPE degradation (484–490 °C). SEM images showed improved dispersion of SBP. The composites has provided less than 2% weight loss and classified as ‘very durable material’ against white-rot and brown-rot fungi attack. Through this study, potential utilization of SBP in LDPE matrix was demonstrated.     

Application Of Superconducting High Gradient Magnetic Separation Technology On Silica Extraction From Iron Ore Beneficiation Tailings

Comprehensive utilization of tailings resources not only solves environmental problems but also creates huge economic benefits. In this paper, fine weakly magnetic particles were extracted from iron ore beneficiation tailings and silica (SiO₂) was separated and purified using a superconducting high gradient magnetic separator. Based on plenty of contrast experiments, SiO₂ content of the magnetic concentrate could be increased from 68.67% to 92.57% with the selected optimal parameter combination, i.e., a magnetic flux density of 3.2 T, a pulp concentration of 40 g/L and a slurry flow velocity of 500 mL/min. The concentrate can be utilized as low-grade normal SiO₂ sands for industrial use, or act as the raw materials for preparing high-purity SiO₂ product.     

Cellulosic fines: Properties and effects

Any cellulosic pulp consists of particles of different dimensions. When trying to understand and control its properties, it is important to consider not only the bulk amount of long fibres, but also the material known as ‘fines’, which may comprise between 1 and 40% of a pulp. These fines have a great impact on the behaviour of pulp, on its processing, and on the characteristics of the resulting products. We compiled a review of research efforts to characterise the fines fraction by origin, morphology, and chemical composition, and to evaluate the fines’ effects especially in papermaking. The main feature of fines is the large specific surface area associated with their size. Their chemical constitution, particularly their charge, and the magnitude of their surface are the basis for their interactions with other pulp components such as extractives, fillers, and retention aids. The surface of fines affects drainage, as well as sheet density and strength. Several optical paper properties are influenced by the morphology of fines and by their chemical composition, which deviates from that of the long fibre fractions. The targeted utilisation of fines is a potential control variable in papermaking applications in order to obtain desirable paper properties.